Winter Maintenance & Tips for Your Furnace

The majority of individuals dislike being chilly. So, if you’ve ever been taken off guard by a faulty furnace in the dead of winter, you know how frustrating it can be. Routine maintenance can often help homeowners avoid mechanical problems. 

Each Fall, you should get a furnace tune-up. Your HVAC technician can inspect and clean your furnace, discovering faults before they become significant problems. In addition, you can undertake some maintenance tasks on your own.

Get your Air Filter Cleaned.

Often, the most straightforward approach is the most effective. Allowing dirt and debris to accumulate in your air filter might cause your furnace to malfunction and potentially cause long-term issues. Change your furnace’s filters regularly to help it perform at its best—call furnace service San Fernando, CA to get your filter cleaned.

Check on your CO Detectors. 

Allowing carbon monoxide to build up in your house is dangerous to you and your family. Therefore this is a crucial step. Regularly test your CO detectors to notify you if your furnace develops a leak. If your CO detectors are not working, connect with heating replacement San Fernando, Ca to get it fixed or replaced if needed.

Cover the AC Condenser with a Cloth.

Cover the condenser to protect it from falling icicles unless your HVAC has a heat pump. In that case, don’t cover it at all because it operates all year. Huge trash can lid secured with bungee cords works pretty well for this role. You can also cover the fan aboard, but don’t wrap it with a moisture-wicking plastic sheet.

Lift the Heat Exchanger and Clean it.

The heat exchanger should be vacuum-cleaned and brushed out annually by a trained professional while the machine is turned off. A specialist will inspect it for flaws that might lead to a dangerous carbon monoxide leak into your home while it’s being cleaned. If you have trouble doing it yourself, connect with furnace service San Fernando, Ca, to get it done by experts.

Clean and Lubricate the Blower Motor.

To begin, check your owner’s manual to discover if your motor requires lubrication. Turn off the power, open the cover, and wipe the bearing caps if this happens. After that, take off the caps and grease the bearings.

The Igniter Switch should be Tested.

You may need to relight the pilot on an older machine. Electronic ignitors are used in newer systems. Push the reset button if the ignitor isn’t working. Check the unit’s circuit breaker if that doesn’t work.

Examine the Pipe as well as the Carbon Monoxide Detectors.

Carbon buildup and even small animals can be found in chimneys. They should be inspected by a specialist regularly. Carbon monoxide detectors should also be tested or replaced regularly, as they assist protect you against the “silent killer.”

Set the Thermostat to the Desired Temperature.

Change the setting from cooling to heating and raise a few degrees above the current room temperature. If the heat doesn’t come on after a minute, remove the cover and double-check the wiring connections. Ensure the HVAC system’s power source is turned on if the connections are snug. If it’s still not working, you may check the furnace fan, blower, or heat pump, but it’s probably best to call in a pro.

 If you hear weird noises coming from your HVAC system, be quick to call Santana Air Inc, as avoiding these issues can lead to a more significant problem. They have a highly-skilled workforce who will get the job done with great accuracy and at very affordable prices.

 

Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on pinterest
Scroll to Top